Model 1010 Vacuum Oven is a table top vacuum oven designed for
the purpose of processing components under low levels of vacuum
and at elevated temperatures. Processing under vacuum greatly
decreases the possibility or oxygen or other airborne components
from contaminating your product. All stainless steel components
and assemblies ensure contaminate-free processing. Internal
fusion welding of the chamber and related components provides
for vacuum integrity to below 10-8 torr. Internal heating elements
minimize the energy used to heat the components and produce
faster heat up times than through the wall heaters. The vacuum
chamber dimensions is 10'' diameter x 10'' deep and comes standard
with two shelves that can be easily removed.
Some of the applications include out gassing of ceramics and
O-rings, annealing, passivation, and vacuum curing.
- One-button operation
- Variable flow N2 purge
- Digital temperature control
- Temperature to 250 C
- Thermocouple vacuum gauge
- Vacuum to 10-8 Torr
- Safety interlocked
- Quartz viewport
- Dimensions 19"w x 15"h x 18"d
- Portable cart
- Direct drive mechanical pump
- High vacuum to 10 - 6 Torr
- High temperature to 400C
- PLC process control
- Internal configuration
- 110 VAC 15 Amp
- 10 PSI Dry Nitrogen
- 70 PSI Air
Description of Options
- Pump Package
- This option package includes a 3.2 cfm
direct drive two-stage mechanical pump, exhaust mist eliminator,
inlet sieve trap, and all associated plumbing components
for proper installation.
- Portable Cart
- The portable cart is constructed of stainless
steel and then is electropolished to passivate all surfaces
and to produce a high quality look. The dimensions of the
cart are 24"w x 20"d x 25"h and has a catch
pan base for storage of the mechanical pump.
- High Vacuum Pump
- the high vacuum option consists of a high
vacuum gauge, an 80 L/S turbo pump, turbo controller, and
the necessary plumbing to decrease the base pressure to
the low 10-6 range.
- High Temperature
- The high temperature option increases
the temperature in the chamber and the insulation to enable
bake outs at 400C.
- PLC Control
- The PLC option provides for automatic
process control through the use of a Programmable Logic
- Internal Configuration
- The internal shelving or fixturing can
be custom designed to fit the needs of the application.
This option will be priced on request.
|Model 1010 Oven
|Pump Package 3.2 cfm
|High Vacuum Pump